SumoSprings Solo Custom Helper Springs # SSR-290-54 will fit your 1996 Chevrolet P32 and they are for the rear axle.
If you axle need suspension enhancement for the front axle you can use the Timbren # TUF100. view full answer...
I reached out to Roadmaster and the Roadmaster Reflex Steering Stabilizer for Chevy/GMC/Workhorse Motor Homes # RM-RSSCP30 is a confirmed fit for your 1999 Chevy P30 wide body frame. It is a replacement your factory steering stabilizer. The sturdy steel spring works to correct oversteering and return your vehicle to center for increased control. view full answer...
Unfortunately there currently isn't a steering stabilizer fit available for your 1996 Chevy P30 Chassis. I can completely understand where you're coming from with the poor ride quality in motorhomes having driving numerous models here so I do have some other recommendations for you.
You can replace your front coil springs with the SuperCoils Custom Suspension Coils # SSC-11 to help stiffen up the suspension. From there you can install the Timbren Front Suspension Enhancement System #... view full answer...
If your P30 wheels are 19.5 inch diameter wheels with 10 lugs and 10 hand holes the Namsco Hub Cap Wheel Cover # NA7195B1 will fit the wheels. view full answer...
Go Power Retreat Solar Charging Kit w/ Digital Controller - 100 Watts - 5.43 Amp # 34272635 is expandable to multiple panels using the Go Power Retreat-E Expansion Kit - 100 Watts - 5.43 Amp # 34272634.
If you want more power, you may want to consider the The Go Power Overlander-E Expansion Kit # 34282182 which can add the Go Power Overlander Solar Charging Kit w/ Digital Controller # 34282181 to give you a larger system.
Either option can be expanded with more panels as desired. I've... view full answer...
The motor is likely the culprit of your steps not retracting all the way. The nylon gear inside the motor is likely the part that is worn. The step is able to extend due to gravity but it sound like the motor does not have enough power on the upstroke to fully retract. Unfortunately, I am not able to reference the model number that you provided. However, if it is a Kwikee Step then there would not be any replacement parts for you due to the age of the step. Therefore, your only option would... view full answer...
From the picture you have provided it looks like you already have the Quick Disconnect Crossbar Assembly for Roadmaster Tow Bars # 910021-00 so you should be good to connect to the Roadmaster Crossbar-Style Base Plate Kit # 909-9. I don't see the mounting hardware or safety plates so if you need replacements you can get them with part # RM-222.
I've attached a couple videos below to help guide you through the installation process. view full answer...
The Roadmaster Reflex Steering Stabilizer, # RM-RBK3-RSSP30, is the correct stabilizer for your 1991 Chevrolet P30 Motorhome. Everything you will need is included, stabilizer, custom mounting brackets, and hardware. No drilling or welding is required so installation should take about 1 hour. view full answer...
The steering stabilizer that you need for your 1995 Georgie Boy Cruisemaster on a Chevrolet P30 Chassis is the Roadmaster part # RM-RBK3-RSSP30.
We don't necessarily have replacement OEM rear sway bar bushing, but we do have the Roadmaster Bushing Kit # RM-4109-106 which is an upgrade to your current system.
The front anti-sway bar that I recommend is the Roadmaster # RM-1109-116 which has a 1-5/8" diameter and replaces the factory sway bar.
Some review videos and installation details... view full answer...
No, the Roadmaster Rear Anti-Sway Bar # RM-1259-109 is not a confirmed fit for your P-Series Chassis. The only anti-sway bar that we carry for a P-Series Chassis like your 1995 Georgie Boy would be the Roadmaster Front Anti-Sway Bar and Bushing Kit # RM-1109-116. view full answer...
The front Firestone Coil-Rite Air Helper Springs # F4100 is the correct kit for a 1994 Chevy Class A chassis (should be the P-30) you have for your Winnebago motorhome!
If you're looking for rear air bags as well then you need one of the following depending on the GVWR of your RV:
- GVWR Less Than 14,500 lbs # AL88203
- GVWR Greater Than 14,500 lbs # AL88219 view full answer...
The Roadmaster Reflex Steering Stabilizer # RM-RSSCP30 fits the P Series from 1998 to 2006 so it is not designed for your 1993 Workhorse P 30.
We have two options that may fit and to determine which on you need will depend on your vehicle. The options we have are:
Roadmaster Reflex Steering Stabilizer # RM-RBK3-RSSP30 fits if you do not have the factory bumper.
Roadmaster Anti-Sway Bar and Bushing Kit # RM-1109-116 fits if your vehicle has a coil spring independent suspension as long... view full answer...
For a motorhome on a P30 chassis with a 36" frame width you would need to install an adjustable-fit hitch like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07. The cross tube for this hitch is 44" in length but can be trimmed down to fit your chassis. The mounting brackets have a 7" drop to help clear your rear fascia, but we also offer this with a 16" drop # 41990-16 if needed. view full answer...
According to Timbren's fitment guide the Timbren Front Suspension Enhancement System # TWFRW22 would be a compatible fit if your 1994 Chevy P32 chassis has a leaf spring suspension. If you have a coil spring suspension you would need the Timbren Front Suspension Enhancement System # TGMFP30W instead. view full answer...
I recommend looking at the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07. This is a universal receiver you can use as there currently is not a custom fit receiver for your 1985 Itasca Sunflyer on a Chevrolet P30 chassis. This particular receiver can be welded or bolted to the frame and uses 7" tall brackets. We do have the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-16 that uses 16" long brackets depending on the amount of drop you need on the... view full answer...
You are correct, the 1994 Chevrolet P-Series Chassis came with both two wheel drive front coil spring suspension and four wheel drive front leaf spring suspension setups. Fortunately, we have stabilizer and sway control options for both models.
For your coil spring suspension, I recommend using both a front steering stabilizer and rear axle stabilizer. For the front steering stabilizer, I recommend using the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Motor Homes... view full answer...
10 gallon water heaters draw more amperage to heat which is why we have the part # CAM11773 which is for this size water heater. The part # CAM11673 would not have the power to effectively heat a 10 gallon setup. view full answer...
Yes, the Air Lift AirLift 1000 Air Helper Springs for Coil Springs part # AL81560 is a confirmed fit for your 1985 Sport Coach Pathfinder which is on a Chevrolet P Series chassis. The shipping cost will be displayed upon checkout. view full answer...
If you really liked the Dexter brakes and want to continue to use that brand I can help you find exactly what you are looking for. Otherwise, no, you do not have to replace the electric brakes on your trailer with the same Dexter brand.
The Nev-R-Adjust Electric Brake Assemblies, part # K23-478-00 LH (driver side) and part # K23-479-00 RH (passenger side), from Dexter that you referenced are great options since you do not have to keep adjusting the brakes. These assemblies are 10 inches... view full answer...
The ClearPlus 77 Series HD Windshield Wiper Blade - 26 inch # CP77261 will work on your 1992 Fleetwood Bounder Class A Motorhome. The wide saddle mount is the design that installs by using two screws. This wiper blade offers both the connectors for installation to the 1/2 inch to 5/8 inch wide saddle mount and the 12 x 4 J-hook.
This part number is for a quantity of one wiper blade view full answer...